自進料混凝土攪拌車常見易損件的保養方法有啊那些?
Self feeding concrete mixer truck is prone to failure in the process of use, so in order to avoid these phenomena, the common vulnerable parts of its equipment are introduced next.
1、所有傳動齒輪、減速箱、鏈條是否按要求加注足量的潤滑油(脂);
1. Whether all transmission gears, reduction boxes and chains are filled with sufficient lubricating oil (grease) as required;
2、攪拌筒運行平穩,襯板、葉片不松動
2. The mixing drum operates stably, and the lining plate and blade are not loose
3、傳動部分的聲音是否正常,減速箱和軸承是否有發熱或漏油現象;
3. Whether the sound of the transmission part is normal, and whether the reducer and bearing have heating or oil leakage;


4、輸送帶松緊度是否合適(中間可下壓10-15mm),傳動鏈中間下沉不大于20mm;
4. Whether the tightness of the conveyor belt is appropriate (the middle can be pressed down by 10-15mm), and the sinking in the middle of the transmission chain shall not be greater than 20mm;
5、鋼絲繩是否磨損嚴重,連接是否牢固;
5. Whether the steel wire rope is seriously worn and whether the connection is firm;
6、剎車和離合器的性能是否良好,剎車片是否磨損嚴重需要更換。
6. Whether the performance of the brake and clutch is good, and whether the brake pads are seriously worn and need to be replaced.
自進料混凝土攪拌車一定要注意攪拌機的操作規范,這樣既保護了攪拌設備,又降低了攪拌設備出現故障的概率,減少了后期大量的設備維修資金。
The self feeding concrete mixer must pay attention to the operation specification of the mixer, which not only protects the mixing equipment, but also reduces the probability of failure of the mixing equipment and reduces a large amount of equipment maintenance funds in the later stage.
以上就是今天帶給大家的知識,自進料混凝土攪拌車廠家專注行業多年,為用戶不斷的提供有價值的內容,更多內容請繼續關注我們:http://www.globalmillenniamarketing.com
The above is the knowledge brought to you today. Since the manufacturer of feed concrete mixer has focused on the industry for many years, it has continuously provided users with valuable content. Please continue to pay attention to us for more content: http://www.globalmillenniamarketing.com