混凝土強制攪拌機攪拌軸停止轉動的原因有哪些?
In the production process, it is normal for the mixing shaft of the concrete forced mixer to stop rotating or rotate a little slowly. In this case, first stop the machine and check to see if there are the following three situations.
混凝土強制攪拌機攪拌軸停止轉動的原因:
Reasons for stopping rotation of mixing shaft of concrete forced mixer:
1、電機傳動皮帶有沒有出現松動的情況?混凝土強制攪拌機電機傳動皮帶過松也能導致商品混凝土拌合機攪拌軸轉動緩慢或者停止轉動,電機傳動皮帶過松,導致傳遞的動力不足。
1. Is the motor drive belt loose? The loose motor drive belt of the concrete forced mixer can also cause the mixing shaft of the commercial concrete mixer to rotate slowly or stop rotating. The loose motor drive belt will lead to insufficient power transmission.


2、有沒有嚴重超載?混凝土強制攪拌機攪拌軸如果超過正常工作負荷,會使攪拌軸轉動緩慢,若負荷過大,就會導致攪拌軸停轉或者是攪拌軸彎曲。
2. Is there a serious overload? If the mixing shaft of the concrete forced mixer exceeds the normal working load, the mixing shaft will rotate slowly. If the load is too large, the mixing shaft will stop or the mixing shaft will be bent.
3、攪拌葉片或側葉片與筒體內壁間有沒有大的異物?出現這種情況也會使混凝土強制攪拌機攪拌軸停止轉動或轉動緩慢。攪拌葉片或側葉片與罐內壁間有較大的異物也會導致攪拌軸停轉,之所以能卡存異物,就是由于攪拌葉片或側葉片與罐內壁間隙過大造成的,尤其是石子。
3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the cylinder? This situation will also make the mixing shaft of the concrete forced mixer stop rotating or rotate slowly. There are large foreign matters between the mixing blade or side blade and the inner wall of the tank, which will also lead to the stop of the mixing shaft. The reason why foreign matters can be stuck is that the gap between the mixing blade or side blade and the inner wall of the tank is too large, especially stones.
以上就是混凝土全自動攪拌車http://www.globalmillenniamarketing.com為大家介紹的內容,感謝您在百忙之中查看我公司的信息內容,如果您想要了解的更多,歡迎您來電進行咨詢!
The above is the automatic concrete mixer http://www.globalmillenniamarketing.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!